Crayfix® Pipe Hangers & Supports

Models

Application Recommended for the suspension of non-insulated hot or cold pipes with larger loads.

 

Specification

Material             Steel

Finish                Electro galvanized 15 microns as per ASTM B 633.

Max Temp.        650°F (343° C)

Compliance        Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58 (Type 12)

Federal Specification WW-H-171E & A-A-1192A (Type 25)

 

*SS 304 /316 can be manufactured on request

*Hot Dipped Galvanized can be manufactured on request.

 

Construction

Permits installation before and after pipe is in place.

Provides economical installation.

Permits use of universally adaptable parts.

Can be used to support the pipes from ceiling or along the wall.

Application

Recommended for the suspension of non-insulated hot or cold pipes with larger loads and        suppressed vibration and sound.

 

Specification

Material             Steel

Lining                EPDM

Finish                Electro galvanized 15 microns as per ASTM B 633.

Max Temp.        -4°F to 230°F (-20°C to 110°C)

Compliance        Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58 (Type 12)

Federal Specification WW-H-171E & A-A-1192A (Type 25)

 

*SS 304 /316 can be manufactured on request

*Hot Dipped Galvanized can be manufactured on request.

 

Construction

Permits installation before and after pipe is in place.

Provides economical installation.

Permits use of universally adaptable parts.

Can be used to support the pipes from ceiling or along the wall.

EPDM lining suppresses sound and vibration

Application

Recommended for the suspension of copper pipes.

 

Specification

Material             Steel

Finish                Electro galvanized 15 microns as per ASTM B 633.

Max Temp.        650°F (343° C)

Compliance        Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58 (Type 10)

Federal Specification WW-H-171E & A-A-1192A (Type 10)

 

*SS 304 /316 can be manufactured on request

*Hot Dipped Galvanized can be manufactured on request.

 

Construction

Formed from one piece giving a double thickness of stock at the point which carries the load.

The lower knurled nut adjusts the pipe line to the proper pitch and the top nut when locked onto position prevents loosening due to vibration.

Application

Recommended for the suspension of copper pipes with electrolytic resistance.

 

Specification

Material             Steel

Lining                EPDM

Finish                Electro galvanized 15 microns as per ASTM B 633.

Max Temp.        -4°F to 230°F (-20°C to 110°C)

 

*SS 304 /316 can be manufactured on request

*Hot Dipped Galvanized can be manufactured on request.

 

Construction

Formed from one piece giving a double thickness of stock at the point which carries the load.

The lower knurled nut adjusts the pipe line to the proper pitch and the top nut when locked onto position prevents loosening due to vibration. EPDM separates copper tubing from the steel ring for electrolytic resistance and also minimizes noise and vibration.

Application Recommended for the support and / or restraint of vertical steel pipes.

 

Specification

Material             Steel

Finish                Electro galvanized 15 microns as per ASTM B 633.

Max Temp.        650°F (343° C)

Compliance        Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58 (Type 8)

Federal Specification WW-H-171E & A-A-1192A (Type 8)

 

*SS 304 /316 can be manufactured on request

*Hot Dipped Galvanized can be manufactured on request.

 

Construction

Designed as rigid support and restraint of vertical steel pipes.

The extension pipe or riser pipe clamp is designed to attach to the pipe and to rest on a structural member or floor.

The clamp should be bolted to the pipe just below support lugs or other attachment that can carry a shear load.

Application Recommended for the support and / or restraint of vertical steel pipes and suppressed vibration and sound.

 

 

Specification

Material             Steel

Lining                EPDM

Finish                Electro galvanized 15 microns as per ASTM B 633.

Max Temp.        -4°F to 230°F (-20°C to 110°C)

Compliance        Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58 (Type 8)

Federal Specification WW-H-171E & A-A-1192A (Type 8)

 

*SS 304 /316 can be manufactured on request

*Hot Dipped Galvanized can be manufactured on request.

 

Construction

Designed as rigid support and restraint of vertical steel pipes.

The extension pipe or riser pipe clamp is designed to attach to the pipe and to rest on a structural member or floor.

The clamp should be bolted to the pipe just below support lugs or other attachment that can carry a shear load. EPDM lining suppresses sound and vibration.

Application

Recommended for the suspension of stationary non insulated or insulated pipe where vertical adjustment is necessary.

 

Specification

Material             Steel

Finish                Electro galvanized 15 microns as per ASTM B 633.

Max Temp.        650°F (343° C)

 

*SS 304 /316 can be manufactured on request

*Hot Dipped Galvanized can be manufactured on request.

 

Construction

Consists of a yoke and support made from shaped steel plate and joining bolt.

15° swing in either direction allows pipe to easily feed through.

Engineered design aligns bolt holes for quicker overhead installation.

Application

Recommended for the suspension of stationary non insulated or insulated pipe where vertical adjustment is necessary.

 

Specification

Material             Steel

Lining                EPDM

Finish                Electro galvanized 15 microns as per ASTM B 633.

Max Temp.        -4°F to 230°F (-20°C to 110°C)

 

*SS 304 /316 can be manufactured on request

*Hot Dipped Galvanized can be manufactured on request.

 

Construction

Consists of a yoke and support made from shaped steel plate and joining bolt.

15° swing in either direction allows pipe to easily feed through.

Engineered design aligns bolt holes for quicker overhead installation.

EPDM lining suppresses sound and vibration.

Application

Recommended for supporting heavy non insulated or insulated pipe horizontally or vertically on ceiling or wall.

 

Specification

Material             Steel

Finish                Electro galvanized 15 microns as per ASTM B 633.

Max Temp.        650°F (343° C)

 

*SS 304 /316 can be manufactured on request

*Hot Dipped Galvanized can be manufactured on request.

 

Construction

Designed for bearing heavy loads pipes, corner locking and excellent gripping.

Can be used with rubber support inserts.

Application

Recommended for mounting heavy non insulated or insulated pipe horizontally or vertically on ceiling or wall with suppressed vibration and sound

 

Specification

Material             Steel

Lining                EPDM

Finish                Electro galvanized 15 microns as per ASTM B 633.

Max Temp.        -4°F to 230°F (-20°C to 110°C)

 

*SS 304 /316 can be manufactured on request

*Hot Dipped Galvanized can be manufactured on request.

 

Construction

Designed for bearing heavy loads pipes, corner locking and excellent gripping.

EPDM lining suppresses sound and vibration.

Application

Recommended for supporting pipe  system horizontally or vertically on ceiling or wall.

 

Specification

Material             Steel

Finish                Electro galvanized 15 microns as per ASTM B 633.

Max Temp.        650°F (343° C)

 

*SS 304 /316 can be manufactured on request

*Hot Dipped Galvanized can be manufactured on request.

 

Construction

Designed for mounting pipes, corner locking and excellent gripping.

Application

Recommended for mounting pipe horizontally or vertically on ceiling or wall.

 

Specification

Material             Steel

Finish                Electro galvanized 15 microns as per ASTM B 633.

Max Temp.        650°F (343° C)

 

*SS 304 /316 can be manufactured on request

*Hot Dipped Galvanized can be manufactured on request.

 

Construction

Designed for corner locking.

Application

Recommended for supporting high load piping system on structural members.

 

Specification

Material             Steel

Finish                Electro galvanized 15 microns as per ASTM B 633.

Max Temp.        750°F (399° C)

Compliance        Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58 (Type 24)

Federal Specification WW-H-171E & A-A-1192A (Type 24)

 

 

*SS 304 /316 can be manufactured on request

*Hot Dipped Galvanized can be manufactured on request.

 

Construction

U Bolt provides vertical support and restricts lateral movement while allowing for axial movement of the piping when installed below the structural member.

U bolt restricts the lateral and upward movement while allowing axial movement of the piping.

Application

Recommended for supporting high load piping system on structural members with suppressed vibration and sound

 

Specification

Material             Steel

Lining                EPDM

Finish                Electro galvanized 15 microns as per ASTM B 633.

Max Temp.        -4°F to 230°F (-20°C to 110°C)

Compliance        Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58 (Type 24)

Federal Specification WW-H-171E & A-A-1192A (Type 24)

 

 

*SS 304 /316 can be manufactured on request

*Hot Dipped Galvanized can be manufactured on request.

 

Construction

U Bolt provides vertical support and restricts lateral movement while allowing for axial movement of the piping when installed below the structural member.

U bolt restricts the lateral and upward movement while allowing axial movement of the piping.

EPDM lining suppresses sound and vibration.

Application

Recommended for supporting a piping system at a definite distance from wall or floor. Used where pipes are periodically uninstalled and installed.

Specification

Material             Steel

Finish                Electro galvanized 15 microns as per ASTM B 633.

Max Temp.        650°F (343° C)

 

*SS 304 /316 can be manufactured on request

*Hot Dipped Galvanized can be manufactured on request.

 

Construction

Designed to mount the pipes away from wall or floor

Designed to easy removal and installation of pipes.

Application

Rubber Support Inserts (RSI) recommended for supporting points of insulated piping system without crushing the insulation. Also recommended to support condenser water and domestic hot/cold water pipe installations.

 

Specification

Density                         1400 kg/m²

Thermal Conductivity      16 w/m°C

Temperature Range 68°F to 230°C (20°C – 110°C)

 

*Self-Extinguishing rubber inserts could be manufactured on request.

*RSI available with steel reinforcements for higher sizes

 

Construction

Very high load bearing capacity.

Dimensionally accurate.

Tongue and groove design for small sizes,

Unique dovetail lock for higher sizes.

Excellent resistance to deterioration/distortion.