A MAJOR MANUFACTURER AND SUPPLIER OF HEATING, VENTILATION, AND AIR CONDITIONING PRODUCTS

  • Call us now
    +971 4 3405516
  • Our Location
    Industrial Area 4, Al Quoz
  • Email us now
    focusair@eim.ae

Crayfix® Pipe Hangers & Supports

Picture 1

Crayfix Pipe Clamp

Application

Recommended for the suspension of non-insulated hot or cold pipes with larger loads.

Specification
Material Steel
Finish Electro galvanized 15 microns as per ASTM B 633.
Max Temp. 650°F (343° C)
Compliance Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58 (Type 12) Federal Specification WW-H-171E & A-A-1192A (Type 25)
  • *SS 304 /316 can be manufactured on request
  • *Hot Dipped Galvanized can be manufactured on request.

Construction

Permits installation before and after pipe is in place.

Provides economical installation.

Permits use of universally adaptable parts.

Can be used to support the pipes from ceiling or along the wall.

Picture 1

Crayfix Pipe Clamp with Lining

Application

Recommended for the suspension of non-insulated hot or cold pipes with larger loads and suppressed vibration and sound.

Specification
Material Steel
Lining EPDM
Finish Electro galvanized 15 microns as per ASTM B 633.
Max Temp. -4°F to 230°F (-20°C to 110°C)
Compliance Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58 (Type 12) Federal Specification WW-H-171E & A-A-1192A (Type 25)
  • *SS 304 /316 can be manufactured on request
  • *Hot Dipped Galvanized can be manufactured on request.

Construction

Permits installation before and after pipe is in place.

Provides economical installation.

Permits use of universally adaptable parts.

Can be used to support the pipes from ceiling or along the wall.

EPDM lining suppresses sound and vibration.

Picture 1

Crayfix Sprinkler Pipe Hanger

Application

Recommended for the suspension of copper pipes.

Specification
Material Steel
Finish Electro galvanized 15 microns as per ASTM B 633.
Max Temp. 650°F (343° C)
Compliance Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58 (Type 10) Federal Specification WW-H-171E & A-A-1192A (Type 10)
  • *SS 304 /316 can be manufactured on request
  • *Hot Dipped Galvanized can be manufactured on request.

Construction

Formed from one piece giving a double thickness of stock at the point which carries the load. The lower knurled nut adjusts the pipe line to the proper pitch and the top nut when locked onto position prevents loosening due to vibration.

Picture 1

Crayfix Sprinkler Pipe Hanger with Lining

Application

Recommended for the suspension of copper pipes with electrolytic resistance.

Specification
Material Steel
Finish Electro galvanized 15 microns as per ASTM B 633.
Max Temp. -4°F to 230°F (-20°C to 110°C)
  • *SS 304 /316 can be manufactured on request
  • *Hot Dipped Galvanized can be manufactured on request.

Construction

Formed from one piece giving a double thickness of stock at the point which carries the load. The lower knurled nut adjusts the pipe line to the proper pitch and the top nut when locked onto position prevents loosening due to vibration. EPDM separates copper tubing from the steel ring for electrolytic resistance and also minimizes noise and vibration

Picture 1

Crayfix Riser Clamp

Application

Recommended for the support and / or restraint of vertical steel pipes.

Specification
Material Steel
Finish Electro galvanized 15 microns as per ASTM B 633.
Max Temp. 650°F (343° C)
Compliance Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58 (Type 8) Federal Specification WW-H-171E & A-A-1192A (Type 8)
  • *SS 304 /316 can be manufactured on request
  • *Hot Dipped Galvanized can be manufactured on request.

Construction

Designed as rigid support and restraint of vertical steel pipes.

The extension pipe or riser pipe clamp is designed to attach to the pipe and to rest on a structural member or floor.

The clamp should be bolted to the pipe just below support lugs or other attachment that can carry a shear load.

Picture 1

Crayfix Riser Clamp with Lining

Application

Recommended for the support and / or restraint of vertical steel pipes and suppressed vibration and sound.

Specification
Material Steel
Lining EPDM
Finish Electro galvanized 15 microns as per ASTM B 633.
Max Temp. -4°F to 230°F (-20°C to 110°C)
Compliance Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58 (Type 8) Federal Specification WW-H-171E & A-A-1192A (Type 8)
  • *SS 304 /316 can be manufactured on request
  • *Hot Dipped Galvanized can be manufactured on request.

Construction

Designed as rigid support and restraint of vertical steel pipes.

The extension pipe or riser pipe clamp is designed to attach to the pipe and to rest on a structural member or floor.

The clamp should be bolted to the pipe just below support lugs or other attachment that can carry a shear load. EPDM lining suppresses sound and vibration.

Picture 1

Crayfix Clevis Hanger

Application

Recommended for the suspension of stationary non insulated or insulated pipe where vertical adjustment is necessary.

Specification
Material Steel
Finish Electro galvanized 15 microns as per ASTM B 633.
Max Temp. 650°F (343° C)
  • *SS 304 /316 can be manufactured on request
  • *Hot Dipped Galvanized can be manufactured on request.

Construction

Consists of a yoke and support made from shaped steel plate and joining bolt.

15° swing in either direction allows pipe to easily feed through.

Engineered design aligns bolt holes for quicker overhead installation.

Picture 1

Crayfix Clevis Hanger with Lining

Application

Recommended for the suspension of stationary non insulated or insulated pipe where vertical adjustment is necessary.

Specification
Material Steel
Lining EPDM
Finish Electro galvanized 15 microns as per ASTM B 633.
Max Temp. -4°F to 230°F (-20°C to 110°C)
  • *SS 304 /316 can be manufactured on request
  • *.Hot Dipped Galvanized can be manufactured on request.

Construction

Consists of a yoke and support made from shaped steel plate and joining bolt.

15° swing in either direction allows pipe to easily feed through.

Engineered design aligns bolt holes for quicker overhead installation.

EPDM lining suppresses sound and vibration.

Picture 1

Crayfix Heavy Saddle

Application

Recommended for supporting heavy non insulated or insulated pipe horizontally or vertically on ceiling or wall.

Specification
Material Steel
Finish Electro galvanized 15 microns as per ASTM B 633.
Max Temp. 650°F (343° C)
  • *SS 304 /316 can be manufactured on request
  • *Hot Dipped Galvanized can be manufactured on request.

Construction

Designed for bearing heavy loads pipes, corner locking and excellent gripping.

Can be used with rubber support inserts.

Picture 1

Crayfix Heavy Saddle with Lining

Application

Recommended for the suspension of non-insulated hot or cold pipes with larger loads.

Specification
Material Steel
Finish Electro galvanized 15 microns as per ASTM B 633.
Max Temp. 650°F (343° C)
Compliance Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58 (Type 12) Federal Specification WW-H-171E & A-A-1192A (Type 25)
  • *SS 304 /316 can be manufactured on request
  • *Hot Dipped Galvanized can be manufactured on request.

Construction

Permits installation before and after pipe is in place.

Provides economical installation.

Permits use of universally adaptable parts.

Can be used to support the pipes from ceiling or along the wall.

Picture 1

Crayfix Light Saddle

Application

Recommended for supporting pipe system horizontally or vertically on ceiling or wall.

Specification
Material Steel
Finish Electro galvanized 15 microns as per ASTM B 633.
Max Temp. 650°F (343° C)
  • *SS 304 /316 can be manufactured on request
  • *Hot Dipped Galvanized can be manufactured on request.

Construction

Designed for mounting pipes, corner locking and excellent gripping.

Picture 1

Crayfix Half Saddle

Application

Recommended for mounting pipe horizontally or vertically on ceiling or wall.

Specification
Material Steel
Finish Electro galvanized 15 microns as per ASTM B 633.
Max Temp. 650°F (343° C)
  • *SS 304 /316 can be manufactured on request
  • *Hot Dipped Galvanized can be manufactured on request.

Construction

Designed for corner locking.

Picture 1

Crayfix U Bolt

Application

Recommended for supporting high load piping system on structural members.

Specification
Material Steel
Finish Electro galvanized 15 microns as per ASTM B 633.
Max Temp. 750°F (399° C)
Compliance Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58 (Type 24) Federal Specification WW-H-171E & A-A-1192A (Type 24)
  • *SS 304 /316 can be manufactured on request
  • *Hot Dipped Galvanized can be manufactured on request.

Construction

U Bolt provides vertical support and restricts lateral movement while allowing for axial movement of the piping when installed below the structural member.

U bolt restricts the lateral and upward movement while allowing axial movement of the piping.

Picture 1

Crayfix U Bolt with Lining

Application

Recommended for supporting high load piping system on structural members with suppressed vibration and sound.

Specification
Material Steel
Lining EPDM
Finish Electro galvanized 15 microns as per ASTM B 633.
Max Temp. -4°F to 230°F (-20°C to 110°C)
Compliance Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58 (Type 24) Federal Specification WW-H-171E & A-A-1192A (Type 24)
  • *SS 304 /316 can be manufactured on request
  • *Hot Dipped Galvanized can be manufactured on request.

Construction

U Bolt provides vertical support and restricts lateral movement while allowing for axial movement of the piping when installed below the structural member.

U bolt restricts the lateral and upward movement while allowing axial movement of the piping.

EPDM lining suppresses sound and vibration.

Picture 1

Crayfix Offset Clamp

Application

Recommended for supporting a piping system at a definite distance from wall or floor. Used where pipes are periodically uninstalled and installed.

Specification
Material Steel
Finish Electro galvanized 15 microns as per ASTM B 633.
Max Temp. 650°F (343° C)
  • *SS 304 /316 can be manufactured on request
  • *Hot Dipped Galvanized can be manufactured on request.

Construction

Designed to mount the pipes away from wall or floor

Designed to easy removal and installation of pipes.

Picture 1

Crayfix Rubber Support Inserts (RSI)

Application

Rubber Support Inserts (RSI) recommended for supporting points of insulated piping system without crushing the insulation. Also recommended to support condenser water and domestic hot/cold water pipe installations.

Specification
Density 1400 kg/m²
Thermal Conductivity 16 w/m°C
Temperature Range 68°F to 230°C (20°C - 110°C)
  • *Self-Extinguishing rubber inserts could be manufactured on request.
  • *RSI available with steel reinforcements for higher sizes

Construction

Very high load bearing capacity.

Dimensionally accurate.

Tongue and groove design for small sizes,

Unique dovetail lock for higher sizes.

Excellent resistance to deterioration/distortion.